1/64 NFS Underground Vortex Acura Integra Samurai 1:64 Waterslide decals and Body kit for HW models

Cool and nostalgic NFSU special car. Decals design made for HW Custom '01 Acura Integra GSR
3d Kit:
The Phrozen mighty revo 14k printer was used for printing.
**Attention: the body kit is based on scans and specifically designed for the HW Custom '01 Acura Integra GSR

The model to be scanned for creating the body kit is shown in the photo.
Please use this exact casting.
To install the kit , you will need to trim the protruding aerodynamic flaps on the front bumper.
The rear bumper and side skirts don’t require any additional prep.
After you've glued the body kit in place and aligned all the elements, let it dry. Then apply epoxy or UV resin underneath for extra durability.

*The car is used for demonstration purposes and is not included in the price.

• Excellent image quality, only vector mockups

• White toner

• All decals are UV printed using best paper

How to apply:

1. Cut the decal using small scissor as the template

2. Dip on water for 10 second (Recommend to use pin set)

3. Spray diecast surface with water

4. Apply decal on diecast surface by sliding it to diecast body. For white toner decal don’t forget to flip the image

5. Set the decal on the right position and use tissue to remove the water, keep the decal on the right position.

6. Make sure decal are applied correctly

7. After dry you can spray all body with clear coat to give more protection

Good luck

If you have any doubt you can googling on youtube with keyword “water slide decal”.